Usage of the processor I/O and wiring (fuses H=87 L=FF).

PA0	PWRHD AD8307
PA1	APAN1 AD8302a (Amplitude)
PA2	APAN1 AD8302a (Phase)
PA3	APAN2 AD8202b (Amplitude)
PA4	APAN2 AD8302b (Phase)
PA5	EXTPW AD8307  (External)
PA6	Battery
PA7	Switch mode (Noise Figure)

PB0	D4  (LCD)
PB1	D5  (LCD)
PB2	D6  (LCD)
PB3	D7  (LCD)
PB4	R/S (LCD) (SS LCD2 - provision)
PB5	R/W (LCD) (MOSI LCD2 - provision)
PB6	SS  (LCD1) (MISO LCD2 - provision)
PB7	SCL (LCD2 - provision)
Rem.: LCD2 will be a 320x240 RGB with touch screen

PC0	SCL (I2C)
PC1	SDA (I2C)
PC2	SS  (VCO1)
PC3	SS  (VCO2)
PC4	SS  (VCO3)
PC5	SS  (logical board)
PC6	SS  (Keypad)
PC7	SS  (USB flash drive - provison)

PD0	(RXD)
PD1	(TXD)
PD2	D+ (USB) INT0
PD3	INT Keyboard
PD4	(OC1B)
PD5	(OC1A)
PD6	Noise gate
PD7	D- (USB)

Cables (Equipment Wire 7 x 0.2mm tinned copper)

1) Power Supply to LCD
    1 DuPont 1x10p female to 1 DuPont 1x6p female + 1 DuPont 1x4p female
	DuPont 10p F
		1  brown (1)
		2  red (1)
		3  orange (1)
		4  brown (2)
		5  red (2)
		6  orange (2)
		7  yellow (2)
		8  yellow (1)
		9  green (1)
		10 blue (1)
	DuPont 6p F (LCD 1-6) (300mm)
		1 brown (1)
		2 red (1)
		3 orange (1)
		4 yellow (1)
		5 green (1)
		6 blue (1)
	DuPont 4p F (LCD 11-14) (270mm)
		1 brown (2)
		2 red (2)
		3 orange (2)
		4 yellow (2)

2) Power Supply to ATmega32
    1 DuPont 1x6p female to 1 DuPont 2x3p female
	DuPont 1x6p (65mm)
		1 brown
		2 red
		3 orange
		4 yellow
		5 green
		6 blue
	DuPont 2x3p (PC0-PC5)
		1 green
		2 blue
		3 brown
		4 red
		5 orange
		6 yellow
    1 DuPont 1x2p female to 1 DuPont 1x2p female
	Both 	1 red (VCC) (70mm)
             	2 black (GND)
    1 DuPont 1x8p female to 1 DuPont 2x4p female
	Both (PB0-PB7) (65mm)
		1 brown
		2 red
		3 orange
		4 yellow
		5 green
		6 blue
		7 violet
		8 gris
    1 DuPont 1x2p female to 1 DuPont 1x1p female shielded cable (LF)
		1 active wire (PA6)
		2 shield (not connected to CPU)

3) Power Supply to BNC Noise Source
    1 DuPont 1x2p female to 1 BNC female 50Ω cable
		1 active wire
		2 shield

4) Power Supply to VCOx (Connctors 1-3 VCO1 must be connected to 1 and so on)
    1 DuPont 1x6p female to solder pads
	Pads on the VCO
		+5V  red
		GND  black
		SCL  orange
		SDA  white
		SS   grey
		+35V violet
	DuPont 1x6p female
		1 violet
		2 black
		3 red
		4 white
		5 orange
		6 grey

5) Power Supply to Logic Board (Connector 4)
    1 DuPont 1x6p female to solder pads
	Pads on the logic board
		+5V red
		GND black
		SCL orange
		SDA white
		SS  grey
	DuPont 1x6p female
		1 -
		2 black
		3 red
		4 white
		5 orange
		6 grey
		
6) Power Supply to PWRHD
    1 DuPont 1x2p female + 1 DuPont 1x1p female shielded LF cable to solder pads
	Pads on the PWRHD
		+5V red
		GND  black
		OUT  live wire of a shielded LF cable (PA0)
		GND  shield (not connected to the CPU)
	DuPont 1x2p
		1 red
		2 black

7) Power Supply to MESAMP
    1 DuPont 1x3p female to solder pads
	Pads on the MESAMP
		+12V red
		GND  black
	DuPont 1x3p
		1 -
		2 black
		3 red

Keypad
Columns : 0xb, 0xd, 0xe, 0x7
Rows : 0xe, 0xd, 0xb, 0x7

Battery : 2.54V to 2.06V

Calibration tables

AD8307
100, 300, 500MHz
0, -10, -20, -30, -40, -50, -60, -70dBm

AD8302
100, 900, 1900, 2200, 2700MHz
0, -10, -20, -30, -40, -50, -60dBm
0, 10, 20, 30, 40, 50, 60, 120, 130, 140, 150, 160, 170, 180°